CALL US AT

 t: (416) 749-2843

As a dealer for Putzmeister, we are ready to provide all Putzmeister branded equipment and parts to meet your needs.

Please see the list below for our most popular pumps; if you don’t see what you’re looking for, we’ll be more than happy to bring it in for you.

 

THOM-KATT TK50 (TK40, TK60 & TK70) TRAILER MOUNTED CONCRETE/SHOTCRETE PUMP: More horsepower for shotcrete work; is ideal for a wide variety of concrete placing jobs, and for pumping structural concrete.

The TK features an angled hopper that is easier to fill and clean. It can pump a variety of materials at up to 74 cu yd/hr, handle the harshest mixes, and tackle a variety of applications.

 

The Thom-Katt hydraulic S-Valve is ideal for pumping larger-aggregate materials. It lets you reverse the stroke to relieve pressure from plugs, or when pumping difficult low-slump or fiber mixes.

 

This pump is ideal for:

• Block Fill

• Pools

• Compaction Grouting

• Bridge Repair

• Refractory Lining

• Masonry Grouting

• Parking Garage Repair

• Sidewalks

 

  Spec Sheet

 

THOM-KATT TK20 (TK10, TK15HP) TRAILER MOUNTED CONCRETE/SHOTCRETE PUMP: A rugged, high pressure pumping system, the TK20 is Putzmeister’s answer for midrange pumping requirements.

With an output up to 17 cu yd/hr, the TK20 has superb control for the most critical geotechnical and compaction grouting applications. Commonly used for wet-process refractory, underground and civil work, it can be fed by ready-mix truck, refractory mixer, or its optional detachable mixer

 

The Thom-Katt hydraulic S-Valve is ideal for pumping larger-aggregate materials. It lets you reverse the stroke to relieve pressure from plugs or when pumping difficult low-slump or fiber mixes.

 

This pump is ideal for:

• Block Fill

• Pools

• Compaction Grouting

• Bridge Repair

• Refractory Lining

• Masonry Grouting

• Parking Garage Repair

• Sidewalks

 

  Spec Sheet

 

S5 & TM100 “ADJUSTABLE” ROTOR/STATOR PUMP AND MIXER: Compact and powerful, this pump and mixer can tackle a variety of materials with ease.

Adjustable stators with specially slotted tubes can be tightened to the rotor as rubber wears – resulting in 3 to 4 times more life, compared to non-adjustable pumps.

 

This pump is ideal for:

• Fire proofing

• Plaster/Stucco

• Injection work

• Pipe and Manhole Relining

• EIFS

• Mortar and Grouts

• Pressure Grouting

• Floor leveling compounds

• Concrete Repair

• Specialty Materials

 

P13 PISTON PUMP: A mixing, pumping and spraying machine in one.

Use for spraying site mixes, such as lime mortar, cement mortar, lime/cement mortar and scratch coats, almost any kind of pre-blended dry mortar, and for shotcreting up to a grain size of 8mm.

 

Use for pumping and pressing the following materials up to 40 bar:

• Liquid screed with or without aggregate

• Bedding mortar

• Filling mortar

• Masonry mortar

• Cement mortar and bentonite slurry

TOMMY GUN: The top plaster/stucco and fireproofing gun in North America for over 40 years.

With a design that has proven the test of time, this gun is rugged enough to last and has been built with quality to ensure the highest resale value.

 

This pump is ideal for:

• Fire proofing

• Plaster – Exterior and Interior

• Injection Work

• Stucco

• Exposed Aggregate Pools

• Mortar

• Grouts

• Floor Leveling Compounds

• Concrete Repairs

• Specialty Materials

GUNNING MACHINES: Gunning equipment for dry process shotcrete that is simple to operate and maintain.

Putzmeister gunning machines come with either a bowl or flat hopper style, and various mounting options to ensure we accommodate your unique needs.

 

We offer a variety of types of gunning machines:

Automatic (AG15) – easily manages dry process shotcrete and is recommended for civil applications

Allentown Piccola – easily manages dry process shotcrete and is recommended for civil and refractory applications

N-type Pneumatic Gun – built to withstand hard, continuous use, with an ability to feed dry or damp, course or fine, dense or lightweight materials

Single Tank Gun – recommended for many refractory applications such as hot-gunning or carbon-injecting electric furnaces, and patching other high temperature vessels

Rotary Gun – using a friction sealed rotor to meter material into the air stream this gun easily handles dry process shotcrete mixes; gun is recommended for civil and refractory applications.

PRE-DAMPENER PUMPS: For use with dry process shotcrete pumps using packaged, pre-blended materials.

Pre-dampening allows the addition of a controlled amount of moisture to a bagged material as it is transported and fed into the gun. This eliminates status electricity, and greatly reduces dust and rebound.

Warehouse & Retail Location:

6290 Shawson Drive, Unit B

Mississauga, ON  L5T 1H5

t: 416-749-2843

Open daily: Monday - Friday from 7am - 5pm

© 2014 CanCrete Equipment Ltd.